![Katamaran_3D_cnc_fraesen_Polystryrol_Hartschaum_3[1] [].jpg](/images/stories/Zufallsbild/Katamaran_3D_cnc_fraesen_Polystryrol_Hartschaum_3[1] [].jpg)
This e-mail address is being protected from spambots. You need JavaScript enabled to view it
3D CNC Milling in ALU with rotary table / indexer
Photos and videos about 3D- treatment in aluminium
We worked with a 3mm radius router, 5mm depth of cut, 1mm roughing
After using an Emery cloth with 0,5mm the sculpture looked nearly polished........ Video: Sculpture milling in aluminum
This is the direct way to the rotary axle tool (more pictures and videos)
2D CNC- Milling a thread in aluminium with High-Z CNC-Router
Milling a thread with our High-Z S-720 / turn table / rotary table / indexer RounDINO 120
You can mill a thread with the turntable RounDINO 120. For that you only need a stylus of 60° head square (pictures will follow), approx. 0,2-0,5mm writing breadth, depended on diameter and gradient of the thread.
Here you get to the "Thread milling in Aluminum"-Video
Round and spiral groove 2D CNC- Milling in Aluminium
Round groove or. spiral groove milling with our High-Z S-720 / turntable RounDINO 120
Milling of spiral groove in aluminium. 3mm router, respective depth of milling 2,5mm.
Last operation round. This way you can produce fastener for example.
Depth 7,5mm. Gradient 15mm. Here is the Video.
